A-Dec 500 Installation Guide

Installation Guide
A-dec 500 12 O’Clock Delivery System
86.0466.00 Rev E
Before You Begin
Before starting the installation:
• Check with local building and code authorities about
installation requirements. They differ from state to
state and internationally.
• Check that a manual air shut-off valve is installed.
• Use the templates provided in the A-dec Inspire Dental
Furniture Pre-Installation Guide (p/n 86.0528.00) and
the A-dec Preference Collection Dental Furniture
Pre-Installation Guide (p/n 86.0142.00), available in the
Document Library at www.a-dec.com to install the
utilities.
Recommended Tools
•Adjustable wrench
• 3/4" socket (deep well) with 6" extension
• Ratchets (1/2" and 3/8" drive)
• Phillips head screwdriver
• Standard screwdriver
• 1/2" concrete drill bit (12" long) or 3/8" wood drill bit
• 7/16" open-end wrench
• 3/8" x 4" ratchet extension
• Torpedo level
•Hex key set
• 5/16" hex bit (3/8" drive)
Assistant’s
Instrumentation
Round
Worksurface
Arm
Assembly
Floor Mount
Tray
Holder
Hub Cover
A-dec 545 12 O’Clock Assistant’s Instrumentation
A-dec 541 12 O’Clock Delivery System Components
Touchpad
Control
Center
Assistant’s
Instrumentation
Doctor’s
Instrumentation
Holder
Arm Assembly
Tray
Holder

A-Dec 500 Specifications

General

Chair Type	Dental Chair
Integrated Touchpad	Yes
Manufacturer	A-dec
Control Type	Touchpad, foot control
Delivery System	Optional
Cuspidor	Optional
Assistant's Instrumentation	Optional
Model	500