What to do if the A.J.Antunes Kitchen Appliances circuit breaker trips?
If the main electrical panel circuit breaker trips for your A.J.Antunes Kitchen Appliance, turn the unit off, let it cool down to room temperature, and then restart it. If it keeps happening, contact your maintenance person or an Authorized Service Agency.
Why is the control display blank on my A.J.Antunes roundup MS-250?
If your A.J.Antunes Kitchen Appliances control display is blank even though the power is on, check these potential causes: * The power cord may not be correctly plugged in. Ensure it is plugged into the appropriate outlet. * The power cord or electrical plug might be damaged. Inspect the electrical wire, plug, and receptacle. * The main electrical panel circuit breaker could be off or tripped. Reset the circuit breaker; if it trips again, contact maintenance or an Authorized Service Agency. * The switch may be inoperable. Contact maintenance or an Authorized Service Agency for service.
How to fix water leaking inside the A.J.Antunes Kitchen Appliances electrical housing?
If water is leaking inside the electrical housing of your A.J.Antunes Kitchen Appliances, the cause may be loose or damaged water line tubes and/or fittings inside the electrical housing. You should tighten or replace these tubes and/or fittings.
What to do if A.J.Antunes roundup MS-250 Kitchen Appliances unit does not heat up?
If your A.J.Antunes Kitchen Appliances unit does not heat up and the control display is on, the hi-limit thermostat may be tripped or inoperable. Reset the hi-limit thermostat. If it requires continuous resetting, contact an authorized service agency for service.
General| Brand | A.J.Antunes |
|---|---|
| Model | roundup MS-250 |
| Category | Kitchen Appliances |
| Language | English |
Lists critical safety guidelines for using the equipment.
Outlines electrical hazards, grounding, and plug warnings.
Guides on properly connecting the unit to the power supply and verifying voltage.
Instructions for connecting the water line and regulating pressure.
Step-by-step guide for using the steamer to cook products.
Addresses problems with the control display being blank or power-related issues.
Solves issues like no heat, circuit breaker trips, and water leaks.
Diagnoses low steam output, poor quality, and condensation issues.
Solves unit flooding or continuous steaming when idle.
To Next Page