ADVANCED SECURITY LEVEL
3. Modif
nd choose
(ESSID) and
hange ESSID Broadcast to DISABLE
Choose WPA/WPA2 to Allowed Client Type.
Authentication = Pre-shared Key
Pre-shared key type = Passphrase (8~63 characters)
e-shared Key = < Type password here >
Note! Type Pre-shared Key about 8 - 63 characters long
e 12 for future use
ontrol.
Choose Yes to Enable MAC Filtering. Choose Allow to
i
will
(Wireless LAN card MAC can be
/ALL command)
ve
Note! Check MAC addresses from Wireless LAN adapter
etwork will work right when
WPA/WPA2 encryption
reless network settings. You can find instructions from pages 15 - 16.
y wireless network settings.
Go to WIRELESS menu a
Channel/SSID/Security.
Change new name to wireless network
write it down to page 12.
C
Note! Network name can not contain any special
characters or spaces.
Change below settings to WPA/WPA2 menu.
Pr
Press Save Settings bottom-edge of page.
password. Write your password to pag
with your computer.
In WIRELESS menu choose Access C
Access Rule for registered MAC addresses. Enter w
LAN card MAC addresses from all computers which
ess point.
reless
access to this acc
found ex. in Win2000/XP with IPCONFIG
When you have added all MAC addresses, press Sa
Settings bottom-edge of page.
on Wireless Network Connection.
You can remove network cable now. Wireless n
password is entered to computer wi
14
To Next Page
Loading...