A-Link RoadRunner 24AP - Set up PPP connection

To Next Page

To Previous Page

onnection5. Set up PPP c

(This step is for those who Internet connection is with PPPoA or PPPoE authentication)

0.2

d type address http://10.0.1. Open Internet browser an

and press Login.

Choose ”

press Next button.

instructions from step “

security”. Press Next button.

5. Ad

Country = Others

Internet Service Provider = ISP use PPPoE or ISP use PPPoA

ues >

Encapsulation = LLC or VC MUX

Username = <Type username for PPP connection>

Password = <Type password for PPP connection>

Confirm Password = <Type password again>

In fourth step”4. Confirm” you can check and confirm modified

values before saving. Press Next to save all these changes.

2. Type password password

SETUP WIZARD and in first step ”1. Getting Start3.

4. In second step ”2. Channel/SSID/Security” you can setup

wireless network settings and security. Check detail

8 Setting up wireless network and

d your ISP setting in third step”3. Parameters Settings”.

IPTV = No

VPI/VCI = < Add your ISP VPI/VCI val

Press Next button.