A-Maize-Ing Heat LDJ620-9 User Manual (English)

Questions and Answers:

W
William BarajasAug 11, 2025
What to do if A-Maize-Ing Heat LDJ620-9 Furnace is overheating?
- C
  Christina MasseyAug 11, 2025
  If your A-Maize-Ing Heat Furnace is overheating, several factors could be the cause. First, ensure the furnace is installed correctly. If it's an add-on furnace, check for air backfeeding from the other furnace. Also, verify that the hot air output and cold air return connections are at least 196 square inches; if they have been reduced to less than this, it can cause overheating.
C
Christina HernandezAug 18, 2025
Why does the fire go out in my A-Maize-Ing Heat Furnace?
- K
  Katherine CooleyAug 19, 2025
  If the fire in your A-Maize-Ing Heat Furnace keeps going out, it could be due to a chimney draft that is too high, leading to the buildup of clinkers. Address the chimney draft issue and clean out any accumulated clinkers to resolve this.
P
Paul BruceAug 26, 2025
Why is my A-Maize-Ing Heat LDJ620-9 Furnace inefficient and has too much ash?
- T
  Tammy BondAug 26, 2025
  If your A-Maize-Ing Heat Furnace is inefficient and producing too much ash, several factors could be contributing. Ensure you are using clean and dry corn. Also, verify that there is sufficient combustion air and draft. Finally, adjust the OFF time during low fire operation.
S
Sean HernandezSep 3, 2025
What to do if the chimney draft is too high in A-Maize-Ing Heat Furnace?
- I
  Ivan ColemanSep 3, 2025
  If the chimney draft is too high in your A-Maize-Ing Heat Furnace, especially with tall or large chimneys, you might need to install a second barometric regulator. Additionally, it may be necessary to reduce the outlet opening to approximately 28 square inches.

A-Maize-Ing Heat LDJ620-9 Specifications

General

Brand	A-Maize-Ing Heat
Model	LDJ620-9
Category	Furnace
Language	English

A-Maize-Ing Heat LDJ620-9 User Manual

Table of Contents

Questions and Answers:

A-Maize-Ing Heat LDJ620-9 Specifications