What to do if A.N.T Speakers have sound quality problem?
If you're experiencing sound quality issues with your A.N.T. Speakers, first check the source signal. Also, ensure that the loudspeaker power selector is properly set, avoiding settings that are either too low or too high.
Why A.N.T Speakers have distortion?
If you are hearing distortion from your A.N.T. Speakers, ensure that the speaker power selector is correctly set. Avoid setting the power too high.
How to fix A.N.T Speakers with no sound?
If you experience no sound or very low sound from your A.N.T. Speakers: * Ensure the connection cable between the speaker and the amplifier is working and properly connected. * Verify that the loudspeaker power selector is set correctly, ensuring that a too low power setting hasn't been selected.
Details the speaker's input and control features, including cable and power selector.
Explains connections for 70V or 100V constant voltage audio lines, noting cable section and signal loss.
Details connections for 8 Ohm constant impedance audio lines, advising on load impedance and cable length.
To Next Page
General