21page
owner´s manual
1. Insert the key in the battery lock (1) and open
the lock.
2. Carefully align the battery to the xed batte-
ry case under the rack and attach the battery by
sliding the battery in riding direction to the dead
stop.
3. Make sure that the battery is attached correct-
ly and lock the battery. Remove the key.
4. To activate the system turn on your battery by
using the ON/ OFF-switch (2) on the right side
(LED illuminates RED).
5.7 Attaching and connecting the battery to your A2B
1
2
To Next Page
Loading...
