a2b Galvani - 10.0 Technical Information

32page
10.0 Technical Information
General performance specication
• Overall dimensions: 1900 mm x 795 mm x 1105 mm
• Tyres: 28“ x 1,75“
• Frame sizes: 17“ und 20
• Curb weight without battery: 22.7 kg
• Curb weight with battery: 25,5 kg
• Maximum permitted load: 140 kg
• Maximum permitted load on rear carrier: 10 kg
• Maximum speed with motor support, at level ground: 15.5 mph
Note: regulated
• Maximum speed with motor support, at level ground, no head or tail
wind, no start/stops: 50 to 70 km (31 to 43 miles)
• Operation conditions: Temperature -5 to 40 °C (+23°F to 104°F), ma-
ximum humidity 80 %
Electrical specication, battery
• Battery chemistra: Lithium-ion
• Nominal voltage: 42 V
• Normal voltage operating range: 30 bis 42 V
• Nominal capacity: 9,0 Ah
• Charging methos: CC/CV (constant current/constant voltage)
• Weight: 2,8 kg
Battery management system (BMS)
• Controls and stops over-charging
• Controls maximum charge current
• Controls over-discharge amperage
• Controls over-discharge voltage
• Over temperature shut-off
• Provides cell-to-cell balancing function
Electrical specication, battery charger
• Input voltage: AC, 115/230 V, 50/60 Hz
• Output voltage: VDC, 42 ± 0,5 V
• Output amperage: 2,35 A
• AC line fuse rating: 10 A
Electrical specication, motor
• Motor type: brushless DC, gearless
• Motor voltage rating: 36 V
• Continious power output: 250 W
Electrical specication, motor controller
• Control function: current, voltage, temperature, speed, dynamofunction motor
• Position: In Motor integrated