A4Tech RN-10B - How to Pair the X-Far Wireless Devices; How to Indicate Battery Status

B. How to Pair the X-Far Wireless Devices
The G5/G7/G9 mouse series have been preset the ID Code in the factory. But under the
circumstances you lose receiver or want to use with the other receiver in the same
product series, you need to refresh the ID Code before using it.
Step 1: Right click on the icon
in the
taskbar
and select
“Pair ID Program”
Step 2: Press “Start Pair ID” to
refresh ID Code.
Step 3: Remove the mouse batteries and insert again in 15 seconds， 6 digits of
matching code will be displayed on the menu as shown “Mouse Pair ID OK”.
C. How to Indicate Battery Status