Aacraft Go Hang It PRO User Manual

B
D
F
A
E
C
REMOVABLE LEVEL - Snaps o and sets on
the top edge of your frame to level your
pictures.
REMOVABLE PUSH PIN - Used to mark nail
holes through the HOOKS (see g. E.) when
hanging pictures with wire hangers.
MAGNEKEYS - Remove and insert into the
notch of our SINGLE-NOTCH PRECISION
HANGERS, sawtooth or D-ring hangers to
perfectly mark your nail holes.
CENTER BUTTON - Telescopes and extends
the base of the unit for wire-hanging
pictures. Simply push the button and pull.
BUILT-IN HOOKS - Used to suspend wire
hanger pictures on the wall where desired.
Insert the PUSH PIN into the guide holes to
mark where your nails go.
SILICONE LATCH - Keeps the removable
hardware case, with 85 pieces of picture-
hanging hardware, attached to the unit.
GET TO KNOW GO HANG IT! PRO
A
B
C
D
E
F
© Aacraft, Inc. Georgetown, Texas. All rights reserved. Go Hang It!
is a trademark of Aacraft, Inc. Patent pending. MADE IN CHINA
12 Single-Notch Precision Hanger
24 Self-Tapping Screws
10 Picture Hooks (10 lb)
8 Picture Hooks (20 lb)
4 Picture Hooks (30 lb)
10 Nails 1.7x25
10 Nails 2.0x30
6 D-Hooks
8 FT Hanging Wire
(fits 10 lb Hooks)
HARDWARE ESSENTIALS INCLUDED

Aacraft Go Hang It PRO Specifications

General

Brand	Aacraft
Model	Go Hang It PRO
Category	Valve Positioners
Language	English

Summary

Get To Know Go Hang It! Pro Features

Removable Level

Snaps off and sets on the frame's top edge to level pictures.

Removable Push Pin

Used to mark nail holes through hooks when hanging pictures with wire hangers.

MagneKeys

Remove and insert into hanger notches to perfectly mark nail holes.

Center Button

Telescopes to extend the base for wire-hanging pictures.

Built-in Hooks

Used to suspend wire hanger pictures on the wall.

Silicone Latch

Keeps the removable hardware case attached to the unit.

Sawtooth/D-Ring Picture Hanging Guide

Insert MagneKeys

Remove and insert MagneKeys into sawtooth, D-Ring, or single-notch hangers.

Level and Mark Holes

Place level on frame, position on wall, push to mark nail holes.

Install Hardware

Locate marks made by MagneKeys and install nails straight into wall.

Hang Your Picture

Hang the picture on the installed hardware.

Wire Picture Hanging Guide

Extend & Hook

Extend base, suspend wire on built-in hooks, position and level picture.

Mark Holes

Press frame against wall, remove, use push pin to mark nail holes.

Install Hardware

Locate marks made by push pin and install picture hook hardware.

Hang Your Picture

Hang the picture on the installed hardware.