Need help?Do you have a question about the AAF OptiFlo RC Series and is the answer not in the manual?
General| Static Pressure | Up to 12 in. w.g. |
|---|---|
| Filter Options | HEPA, Carbon |
| Applications | Commercial and industrial air filtration |
| Frame Material | Galvanized steel |
| Media Type | Synthetic |
Emphasizes personnel safety as the highest priority when dealing with industrial dust collection equipment.
Outlines guidelines for personnel training and safe practices during installation and operation.
Details dust explosion hazards and user responsibilities for mitigation, referencing NFPA standards.
Warns about electrical hazards, requiring qualified personnel and adherence to electrical codes for work.
Stresses keeping access panels secured while the fan is operating and locking out power before access.
Warns of severe injury risk from incorrect lifting and details proper use of lifting lugs and spreader bars.
Covers considerations for site location, including wind, seismic loadings, local regulations, and noise levels.
Details that the collector is typically mounted on a concrete foundation, considering various loads for mounting.
States that safe and efficient operation relies on proper installation and recommends consulting authorities.
Details shipping and mounting of AAF-supplied explosion vents onto the collector frame.
Provides a step-by-step procedure for safely removing and replacing filter cartridges, including PPE.
Identifies improper pulse cleaning as a common cause for high differential pressure issues.
Lists causes for visible emissions like damaged cartridges, gaskets, or air bypass.
To Next Page
