Rev D 2
TABLE OF CONTENTS PAGE #
1.0 Scope 2
2.0 General Specifications 2
3.0 Remote & Motion Sensor Configurations (inc. P2 location) 3
4.0 Blind Types 6
5.0 Set Upper and Lower Blind Limits on Motor 6
6.0 Pair Remote with Motor 7
7.0 Set Solar Sun & Wind Sensor 7
8.0 Set the Number of Channels on Remote 7
9.0 Adding a Remote/Channel 8
10.0 Solar Sun & Wind Sensor Display 8
11.0 Adding Connector Hub (Bridge) 9
1.0 Scope:
This specification relates to the Bear Motors and their respective accessories to provide operation remotely.
The following pages provide images and flow charts to aid in setting up various requirements for Bear
Remotes, RTS Wall Switches, Solar Sun & Wind Sensor, Motion Sensor and Connector Hub.
2.0 General Specifications:
Suits awning type- eZip, Vertishade, Straight Drop
Bear 40/15 RTS Manual Override Motor
Suits FAA up to 6 metre width
Suits FAA over 6 metre width
Bear 1 Channel Remote (2016)
Bear 1 Channel Remote (2018)
Suits multiple awnings up to 15 (can be operated
individually or altogether
Bear 15 Channel Remote (2016)
Suits multiple awnings up to 15 (can be operated
individually or altogether
Bear 15 Channel Remote (2018)
Suits multiple awnings up to 15 (can be operated
individually or altogether
Bear RTS Wall Switch 1 Channel
Wall mounted suits single awning
Bear RTS Wall Switch 1 Channel (2016)
Wall mounted suits single awning
Bear RTS Wall Switch 15 Channel (2016)
Wall mounted suits multiple awnings up to 15 (can
be operated individually or altogether
Bear RTS Wall Switch 15 Channel (2018)
Wall mounted suits multiple awnings up to 15 (can
be operated individually or altogether
Solar Powered, programmed via remote
Suits FAA, battery powered RTS
Awning control via APP, 2.4GHz Wifi required
Bear Motor
Product Specification
To Next Page
Loading...