...
. . . . .
'j:ilol'
.
iilll
Ii
AALBORG
INDUSTRIES'
I I
MODULATING OIL BURNER . OM5560 03#A.2
I , -
Modulating oil burner
1
18"
21-2/60
General
The modulating oil burner is a pressure atom ising burner capable
of
burning both diesel
oil (DO) and heavy fuel oil (HFO).
As the burner is a very vital component
of
the boiler plant, the operating staff should
be thoroughly instructed with regard to the operation
of
the equipment and the safety
. regulations. This is due to the fact that burner problems are often caused by incorrect
burner operation. With frequently occurring burner faults, the nearest service centre
should be consulted.
To ensure a safe and reliable function
of
the burner it must be inspected at least once
a year by a representative
of
the supplier or by another competent and qualified person.
1.1
Safety regulations
Caution: To ensure safe
burner
operation, the
burner
has to be installed and
commissioned by qualified personnel, and all guidelines
in
these in-
structions have to be followed.
All safety equipment such as flame sensor equipment and correcting elements may
only be replaced by qualified personnel, which can be ordered by contacting Aalborg
Industries.
Warning: Repair
of
any of the safety components
is
NOT permitted. Failure to
comply may result
in
serious injury
or
death and may cause consid-
erable damages to the boiler plant.
1.2 Qualified personnel
Qualified personnel according to these operating instructions are persons, who are
confident
in
installing, regulating and commissioning the burner, and who have qual-
ifications to carry out this work
i.~.:
• Persons who are trained to operate electric circuits and units according
to
the safety
standards.
• Persons who are qualified in the use
of
dangerous fuel according to the relevant
laws and regulations.
Language
UK
To Next Page
Loading...