How to fix a broken handle on A&A Global Industries Vending machines?
If the handle of your A&A Global Industries Vending machine is broken, this is likely due to vandalism on the coin mechanism. The suggested solution is to replace the handle.
What to do if A&A Global Industries Vending machines product comes out without a coin?
If the product is coming out of your A&A Global Industries Vending machine without using a coin, it may be due to improper delivery wheel timing. To resolve this, reset the timing mark with the timing slot.
Why is the vended amount too small in A&A Global Industries Vending machines?
If the vended amount from your A&A Global Industries Vending machine is too small, it could be due to the delivery setting not being set properly, a bridging problem, or the handle being turned too rapidly. You should adjust the delivery setting. If bridging is the issue, replace the candy.
Why is the vended amount too large in A&A Global Industries Vending machines?
If the vended amount from your A&A Global Industries Vending machine is too large, it is likely that the delivery setting is not set properly. Adjust the delivery setting to correct this issue.
What to do if A&A Global Industries Vending machines product vends by moving handle back and forth without a coin?
If your A&A Global Industries Vending machine is vending product by moving the handle back and forth without a coin, it's likely caused by an improper product setting. Reset the delivery wheel to a smaller setting to fix this.
Why are there inconsistent vends from A&A Global Industries Vending machines?
If you're experiencing inconsistent vends with your A&A Global Industries Vending machine, the timing of the delivery wheel may not be set properly. Ensure the timing mark is visible in the timing slot; it should be visible every 3 vends.
Why does the coin mechanism turn backward without a coin in A&A Global Industries Vending machines?
If the coin mechanism of your A&A Global Industries Vending machine turns backward without a coin, it is likely due to a broken spring for the full stroke pin, or the stroke pin is missing. Replace the spring and/or pin to resolve this issue.
Why does A&A Global Industries Vending machines lean too far forward?
If your A&A Global Industries Vending machine leans too far forward, the octagon stand bracket or mounting plate is likely on wrong. Remove the machine assembly from the octagon stand assembly.
Why is the handle not horizontal in the rest position in A&A Global Industries Vending machines?
If the handle of your A&A Global Industries Vending machine is not horizontal in the rest position, it could be due to a broken cam or the lock lever being too tight. Adjust the lock lever screw or replace the nylon cam.
Why does A&A Global Industries Vending machines lean or is loose?
If your A&A Global Industries Vending machine leans or is loose, the pedestal rod is likely loose. Remove the Octagon base and pole, then tighten the keps nuts above and below the spill tray/bracket, and tighten the nuts at both ends together.
Provides technical dimensions like height, depth, weight, base size, and pedestal height.
Details the machine's capacity for different products like candy, superballs, gum, and capsules.
Advises users to check all parts before starting the assembly process.
Lists the specific hardware components included in the package for assembly.
Important note regarding TC latches for coin mechanisms.
Lists all components required for the Octagon Stand assembly.
Lists parts for the case assembly, including color variations.
Provides guidance on waxing the stand to prevent corrosion in different environmental conditions.
Explains how to set the adjustable wheels and brush housings for different product sizes.
Details using specific wheels and housings for capsules and gum.
Instructions on setting the product wheel timing for correct dispensing.
Steps for removing the coin mechanism from the machine.
Instructions for tightening brush housing screws and filling the machine with product.
Guidance on safely removing and replacing the machine lid for servicing.
Lists common issues with the machine and their corresponding solutions.
Addresses further common problems and provides solutions for machine operation.
General| Brand | A&A Global Industries |
|---|---|
| Model | Triple Crown |
| Product Type | Vending Machine |
| Construction | Metal |
| Material | Metal |
To Next Page