Need help?Do you have a question about the A&E NEO-ROUND SHOWER STALL and is the answer not in the manual?
General| Type | Shower Stall |
|---|---|
| Shape | Round |
| Door Type | Sliding |
| Material | Acrylic |
| Color | White |
Key considerations and precautions for a successful installation.
Ensure walls are aligned, drill pilot holes, and secure them.
Assemble the main structure for the shower doors.
Fit sealing moldings onto fixed panels and insert into extrusions.
Secure panels to the top and bottom rails using clamps.
Fit wall posts into panels, align with base threshold, and mark positions.
Drill pilot holes, apply silicone, and secure wall studs with screws.
Ensure the door frame rail is level and aligned with the base sill.
Drill pilot holes in wall studs and secure the door frame with screws.
Mount roller stoppers and bumpers on rails, securing with screws.
Attach magnets and water deflectors to the door panels.
Mount upper and lower rollers onto each door panel.
Attach the door handles to the door panels.
Place the top rollers into the upper rail.
Engage spring buttons to insert lower rollers into the bottom rail.
Adjust upper rollers to ensure magnets close the door perfectly.
Apply silicone sealant to the exterior of the unit.
To Next Page