Need help?Do you have a question about the aarke CARBONATOR 3 and is the answer not in the manual?
General| Product color | Black |
|---|---|
| Housing material | Stainless steel |
| Carbonating bottle volume | 0.8 L |
| Carbonating bottle included | No |
| Carbonator charger included | - |
Weight and Dimensions| Depth | 258 mm |
|---|---|
| Width | 153 mm |
| Height | 414 mm |
| Weight | 1680 g |
Rinse the bottle with lukewarm water before first time use. Fill with cold, clean water up to the marked filling line.
Place the bottle in the socket and begin to screw in with a counterclockwise motion.
Pull and gently hold the lever down until you hear a persistent buzzing noise from the valve.
Release the lever back to its resting position. The remaining pressure in the bottle will automatically release with a puff sound.
To clean your Stainless Steel Carbonator, use a microfibre cloth and clean water, with mild soap if needed.
For Carbonators with a gloss finish, use a microfibre cloth and clean water, with mild soap if needed.
Never carbonate anything other than plain water. Avoid adding fruit, ice, or sugar before carbonation.
Never clean the PET Bottle in the dishwasher as high temperatures can compromise its structural integrity.
Keep your Carbonator and bottle out of direct sun, heat sources, or extreme temperatures.
Always unscrew the gas cylinder before transporting the Carbonator.
Do not use the PET Bottle after its expiration date as the plastic may have weakened.
Never attempt to carbonate an empty bottle, as this can lead to dangerous high pressure.
Keep the Carbonator away from children. Always use the sparkling water maker in an upright position.
Unscrew the cylinder and turn the Carbonator upside down. Look down into the cylinder compartment and check for the gasket.
Each Carbonator has an extra gasket stored under the base. Follow the steps to remove and replace it.
Technical details for the Carbonator: Height 414 mm, Width 153 mm, Depth 258 mm, Weight ≈ 1450 g.
Technical details for the PET Bottle: Height 265 mm, Diameter 85.5 mm, Weight 209 mm, Volume ≈ 0.81.
Compatibility information for CO2 Gas Cylinders. Compatible with standard cylinders from major brands.
To Next Page
