What to do if no gas comes out when using my aarke CARBONATOR?
If little to no gas is released into the water when you pull the lever on your aarke Water System, the issue might be that a gas cylinder isn't attached. Ensure that you attach a gas cylinder. Alternatively, the gas cylinder may not be correctly attached; in this case, detach the gas cylinder and then reattach it properly.
How to prevent water from spraying into the spill tray of my aarke CARBONATOR?
To prevent water from spraying into the spill tray of your aarke Water System, ensure that you do not fill the water bottle above the marked filling line.
Warnings against carbonating liquids other than plain water for safety.
Explains why the water bottle should not be washed in a dishwasher.
Advice on avoiding heat sources to ensure safe operation.
Instruction to always detach the gas cylinder before transport.
Recommends replacing the water bottle after its expiry date for safety.
Warns against injecting gas into an empty water bottle due to pressure risks.
General| Material | Stainless Steel |
|---|---|
| Type | Sparkling Water Maker |
| CO2 Cartridge Compatibility | Standard 60L CO2 cartridges |
| Color Options | Black |
| Weight | 1.5 kg |
| Compatibility | Compatible with standard 425g / 60L CO2 cylinders from Sodastream, AGA, Linde and many other brands with thread standard. |
To Next Page
