What to do if gas is flowing into the bottle but the water isn’t carbonated with my aarke Kitchen Appliances?
Ensure you're pressing the Carbonator button until you hear a buzzing sound, then release it. It's important not to release the button until you hear that buzzing sound.
What to do if when I push the Carbonator button, very little or no gas comes out of my aarke Kitchen Appliances?
If very little or no gas comes out when you push the Carbonator button, try the following: * Make sure you’re pushing the Carbonator button all the way down (without forcing it). * Try screwing the gas cylinder in a bit tighter. * Check to see if the gas cylinder is empty. * Listen for a leaking sound; if you hear one, it indicates another issue.
Why is my aarke Kitchen Appliances gas cylinder freezing during use?
The gas cylinder might be freezing inside the machine during use because there may be a leak between the cylinder and the machine. Try screwing the gas cylinder in a bit tighter.
What to do if I hear a leaking sound when I push the Carbonator button of my aarke Kitchen Appliances?
If you hear a leaking sound when you push the Carbonator button and very little gas is flowing into the bottle, it may indicate an issue with the cylinder gasket. Try screwing the cylinder in a bit tighter.
General| Type | Sparkling Water Maker |
|---|---|
| Material | Stainless Steel |
| Bottle Material | Glass |
| Bottle Volume | 0.8 liters |
| CO2 Cylinder Compatibility | 60L CO2 cylinders |
| Operation | Manual |
| Height | 441 mm |
| Color Options | Matte Black |
Lists all accessories and parts provided with the Carbonator Pro.
Details the dimensions and weight of the Carbonator Pro and its glass bottle.
Instructions on handling excess water in the drip tray, often caused by overfilling the bottle.
Recommends using cold water for more efficient CO2 usage during the carbonation process.
Guidance on how to clean the carbonation bottle, recommending hand washing for longevity.
Tips to protect your countertop from condensation that might form on the CO2 canister.
Advice on cleaning the Carbonator machine, specifying cloth types and cleaning agents based on finish.
Guidelines for recycling the machine and its components according to local regulations.
Specifies the required measurements and weight for compatible CO2 gas cylinders to ensure machine safety.
How to inspect the rubber gasket in the cylinder compartment for damage or incorrect placement.
Instructions on how to find and replace a faulty or missing gasket for proper sealing.
Steps to follow for troubleshooting, including checking the guide and contacting customer service.
Providing the support email address and mentioning response times and language capabilities.
To Next Page
