10 Model 390 User Guide
Using the Directory
3. To change the number, use the
Backspace softkey or 3 to
erase digits. Use the dial pad to
add digits. Use the Pause
softkey to insert a 2 second
pause. The pause icon will
appear.
4. Press Save to move to the name.
5. To change the name, use the
Backspace softkey or 3 to erase
letters. Use the dial pad and the
NextSpace softkey to add letters.
Press the ChangeCase softkey to
switch between upper and lower
case.
6. Press Save to save changes.
Copying from the Callers List,
the Redial List, or the Display
to the Directory
1. Open the Callers List, Redial
List, or answer a call.
2. When the number is displayed
on the screen, press J. If
the entry includes a name and
number, the display will show
Saved: Directory.
3. If the entry is a number only
(such as in the Redial List), you
will be prompted to enter a
name. Once you’ve pressed the
Save softkey to save the name,
the display will show Saved:
Directory.
Dialing from the Directory
1. Find the entry you would like to
call in the Directory.
2. Lift the handset to dial the
number, or press the Dial
softkey or ⁄to dial the
number using Handsfree.
Deleting an entry in the Direc-
tory
1. Find the entry you would like to
delete.
2. Press the Delete softkey.
3. Press the Delete softkey again to
confirm.
Deleting all entries in the
Directory
Once you have deleted the
Directory, you cannot get entries
back. You can protect the Directory
by locking it.
To permanently delete all entries in
the directory:
1. Press the Directory button
to open the Directory.
2. Press the Deletelist softkey
3. Press the Delete softkey to
confirm.
Locking the Directory
You can lock the Directory so that
entries cannot be deleted or
changed. You cannot add entries to
a locked directory.
1. Press £.
2. Press o.
3. Press °. The display shows
Directory locked.
To unlock the Directory:
1. Press £.
2. Press o.
3. Press ‹. The display shows
Directory unlocked.
To Next Page
Loading...
Need help?
General
