Aastra 5360ip - Page 64

Supplementary features
64 Aastra 5360/Aastra 5360ip
eud-1279/1.2 – R3.0 – 04.2013
Activating/deactivating DTMF mode
You want to be able to use your phone to control other equipment or to access certain
services, such as remote polling of an answering machine or telebanking. For these
services you need the DTMF mode.
In the DTMF mode each keystroke generates a tone. If for example you enter a call
number during a call, your call partner will hear the tone signals.
You can specify whether the DTMF mode should be generally activated or deactivated
(see Chapter "Configuring the DTMF mode", page 82). DTMF is activated as the default
dialling mode.
If the DTMF mode is generally deactivated, you can activate it and deactivate it again
temporarily during a call.
You're in a call and the DTMF mode is generally deactivated. You want to
activate the DTMF mode temporarily:
DTMF
Press Foxmenu > Foxkey DTMF.
➔The display shows Enter number DTMF. You can now enter the DTMF charac-
ters.
Reset
Resetting DTMF mode:
Press Foxmenu > Foxkey Reset.
Note:
When you hang up, the DTMF mode is automatically deactivated again.