Aastra 5360ip - Page 92

Personalizing your phone
92 Aastra 5360/Aastra 5360ip
eud-1279/1.2 – R3.0 – 04.2013
Store a function under a key – function key
You want to retrieve a frequently used function - for example "call forwarding on no
reply" - using a single keystroke rather than having to enter it by hand. Usually the
function is assigned so that you:
• activate the function with the first keystroke,
• and deactivate the command again with a second keystroke.
Clearing a key
You want to clear the assignment made to a configurable key.
Select the function No function to delete the function key assignment.
Storing a function under a key (from a predefined selection of functions):
<long>
Storing a function under a configurable key/presence key:
Press the key and hold it down for a moment.
➔Display shows choice of key types.
Function key
Scroll to Function key and press the Select Foxkey.
➔The currently set function is displayed with .
<Function>
Select the function you want and press the Select Foxkey.
➔The further prompting depends on the function (see Chapter "Supplemen-
tary features", page 31). Once you have made all the settings, the function is
stored under the key.
Notes:
• The selection of functions can be found in the chapter "Function selection for
configurable key", page 93.
• In addition to the large number of predefined functions you can also write your
own function. For more information please refer to the chapter "Function com-
mands, function codes", page 96.
<long>
No function
To clear a configurable key:
Press the configurable key and hold it down for a moment.
➔The display shows the key type.
Scroll to No function and confirm with the Ok Foxkey.
➔The key configuration is cleared.