AAton A-Minima - Technical Specifications

Technical Specifications :
Technical specifications and User's guide are subject to change
without notice.
- Super16 only, 172,8° * spinning mirror reflex shutter,
- Around 2 kg (4 Lbs) with on-board battery and film.
- l 245mm, h 140mm, w 110 mm (9.7" x 5.5" x 4.4")
- Time recording by XTRprod compatible AatonCode-II matrix-
es, accurate to a 1/4 of a frame. The camera can be used as a
master-clock too.
- Fiber-optic viewing screen, 1:1.78 (16/9) ratio viewing screen
shows markings for wide-screen HDTV and 4:3 aspect ratios, G
= x 5.5.
- Frame Rate - 1 to 32 fps with internal Lithium and up to 50 fps
with an external 12V battery TBD and stop-frame with built-in
intervalometer.
- Nikon or PL mount
- Incident lightmeter -dome- showing T-stop and diff. T-stop,
HMI frequency and monitor scan rates on the camera LCD dis-
play.
- DistantEye viewfinder “Aaton patent”; the only reflex camera
which doesn't fog the film if the eye is not held against the eye-
cup.
- Built-in Intervalometer
- Back light display
- 200' quick change magazines, 'B' wound rolls in Aaton's ~flexi-
ble~ daylight spools (standard metallic 200 spools and 400'
reels, NO)
"Temporary casting" is engraved on the initial cameras. This hous-
ing will be exchanged when the Video Assist becomes available.
* Initial cameras (from # 006 to 025) have a 180° shutter. This shut-
ter will be retrofitted in 172,8° when external housing is exchanged.
Chapter 1 - Presentation
5