AAVA MOBILE Inari 6 User Manual

DRAFT
Inari 6 Quick Start Guide
Inari features, buttons & interfaces
Front
1
Charging indicator LED
OFF not connected to charger
ORANGE charging
GREEN connected and fully charged
RED charge fault
2
Front camera
3
On / Off Button
Push it once to start the tablet; push it again to enable the sleep mode. Push and
hold it to shut down the device.
4
Volume key or programmable buttons
Volume: left side to reduce volume, right side to increase volume
Buttons can be also programmed for instance to control scanner
5
Front receiver
6
Ambient Light Sensor & proximity sensor
ALS recognizes the ambient light and adjusts the display brightness if enabled in the operating
system; PS recognizes if device is held to ear or in pocket
7
Front microphone outlet
8
Front speaker
7
3
4
1
2
6
5
8

AAVA MOBILE Inari 6 Specifications

General

Brand	AAVA MOBILE
Model	Inari 6
Category	Cell Phone
Language	English

Summary

Inari Features, Buttons, and Interfaces

Front Interface Components

Describes the front-facing components including the camera, buttons, and sensors.

Bottom Interface Components

Details the components on the bottom of the device, such as charging pads and USB-C.

Rear Interface Components

Outlines the features on the rear of the device, including the camera flash and main camera.

Device Operation and Setup

Replacing the Battery

Instructions for replacing the device battery, including unscrewing the lid and insertion direction.

Initial Device Setup

Steps for setting up the device for the first time, including charging and powering on.

Device Management and Troubleshooting

Power Button Operation

Instructions on how to use the power button for starting, sleeping, and shutting down the device.

Troubleshooting Common Issues

Guidance on resolving device freezes and other operational problems, including hard reset.

Important Product and Safety Information

General Safety Precautions

Key safety guidelines for handling, operating, and storing the device to prevent damage or injury.

Battery Safety and Handling

Detailed safety instructions for handling, charging, and disposing of the device battery.

Warning Statements

Important warnings, including potential hearing damage from high volume usage.

Regulatory Compliance and RF Exposure

Antenna Positions

Highlights antenna locations on the device and advises on maintaining distance for RF exposure guidelines.

EU Declaration of Conformity

States compliance with EU directives and provides a link to the full declaration text.

FCC Compliance Statement

Outlines FCC rules, compliance statements, and information regarding radio frequency interference.

RF Exposure Information (SAR)

Details the Specific Absorption Rate (SAR) limits and testing for the device to meet government requirements.

Radio Frequency Information and WEEE

Canada Radio Requirements

Covers Industry Canada's licensing-exempt RSSs, radio transmitter conditions, and RLAN restrictions.

Radiation Exposure Statement (SAR) - Canada

Provides SAR compliance information for Canada, including operational distance recommendations.

802.11 Radio Precaution Statements

Precautionary statements regarding the use of 802.11a and general 802.11 radio bands.

Waste Electrical and Electronic Equipment (WEEE)

Information for EU customers on returning products for recycling at the end of their life.