AB IPBox Prismcube Ruby - First Time Installation Steps; Step 1: Run First Installation; Step 2: Language Setup

Run First Time Installation
Step 1. Run First Installation
ABIPBOX Prismcube Ruby is a satellite (DVB-S2) twin tuner receiver.
Please run the following installation steps for the basic system configurations.
- Press MENU and go to Installation.
- Select First Installation and press OK.
Step 2. Language Setup
- Choose the menu language and audio language.
* ABIPBOX Prismcube Ruby
supports all major languages
to make sure its best use
in any part of the world.
Select Next and press OK to go to the next step.
9