—
ABB
ME ASUREMENT & A NALY TI C S | USER GU I DE | OI/AZ25P - EN REV. E
Endura AZ25 series probe
Combustion oxygen monitor
Measurement made easy
Introduction
The Endura AZ25 Combustion Oxygen Analyzer is
the latest in a long line of high-quality, combustion
gas analyzers from ABB. The AZ25 is designed to
measure oxygen concentration in high temperature
furnace atmospheres.
The sensor, based on a zirconium oxide cell, is
mounted at the tip of the probe that is inserted
directly into the furnace. The resulting direct, in-situ
measurement provides an accurate and rapid
oxygen reading, for combustion control /
optimization and process quality control purposes.
The in situ technique provides a true oxygen
measurement inside the process. It eliminates
‘equilibrium shift’ that is common to systems in
which gas samples are extracted and cooled before
measurement.
—
Superior technology
and quality from the
world leader in oxygen
measurement
To Next Page
General