ABB HT563102 User Manual

130 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operation Manual

Turbocharging

ABB Turbo Systems Ltd



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS48-F32 HT563102

n

Mmax

1029 t

Mmax

680

n

Bmax

978 t

Bmax

650

1/s °C

SOLD08 00180 12 60 60

Year 2016

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2412 English

TPS48-F32

Original Operation Manual

Table of Contents

Questions and Answers:

X
xrobertsAug 25, 2025
Why is the exhaust gas temperature too high in my ABB charger?
- L
  Lisa JacobsAug 25, 2025
  If the exhaust gas temperature is too high in your ABB charger, it could be due to several reasons: * A malfunctioning injection system: Repair it or contact the manufacturer. * Air starvation (e.g., a filter silencer clogged with dirt): Clean the filter silencer. * High exhaust counterpressure: Clean or repair the boiler or exhaust silencer. * A contaminated cooler: Clean the cooler. * Low cooling water volume: Top up the water. * High cooling water entry temperature: Inspect or clean the cooling system. * Inadequate ventilation: Improve the ventilation.
H
hrandolphAug 30, 2025
What to do if rotating parts of ABB HT563102 are rubbing?
- A
  Amy GonzalesAug 30, 2025
  Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. If there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
H
Holly McdowellAug 30, 2025
How to fix a sluggish start-up in ABB HT563102?
- F
  Frank KellerAug 30, 2025
  If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
J
Jasmine RollinsAug 30, 2025
What to do if rotating parts are rubbing in ABB HT563102?
- S
  Stacy JacksonAug 30, 2025
  If you suspect rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
C
Cynthia BrownAug 31, 2025
What to do if ABB Industrial Equipment has vibration?
- K
  Katherine Henry MDAug 31, 2025
  If your ABB Industrial Equipment is vibrating, it could be due to rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Other potential causes include a damaged turbine or compressor, or a damaged bearing.
E
erin91Aug 31, 2025
Why is my ABB Industrial Equipment start-up sluggish?
- V
  Victor GonzalezAug 31, 2025
  A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
D
Devin RussellSep 1, 2025
What to do if ABB HT563102 has a sluggish start-up?
- S
  Susan ThompsonSep 1, 2025
  If your ABB Industrial Equipment experiences a sluggish start-up, it could be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
J
Jill HoltSep 1, 2025
What to do if rotating parts in ABB Industrial Equipment are rubbing?
- A
  Anthony AndrewsSep 1, 2025
  If you notice rubbing of rotating parts in your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
N
Nancy BaileySep 1, 2025
How to fix sluggish start-up in ABB Industrial Equipment?
- D
  daisy13Sep 2, 2025
  A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
J
joshuarivasSep 2, 2025
What to do if the exhaust gas temperature is too high in ABB HT563102?
- E
  Eric FitzgeraldSep 2, 2025
  If the exhaust gas temperature is too high, several factors could be responsible. The injection system may be malfunctioning, requiring repair or manufacturer contact. Air starvation might be occurring due to a filter silencer clogged with dirt, which needs cleaning. High exhaust counterpressure could be the issue, necessitating cleaning or repair of the boiler or exhaust silencer. Other potential causes include a damaged or eroded turbine (in which case you should contact an ABB Turbocharging Service Station), a contaminated cooler (clean it), low cooling water volume (top up the water), high cooling water entry temperature (inspect/clean the cooling system), or inadequate ventilation (improve the ventilation).

ABB HT563102 Specifications

General

ABB Type Designation	HT563102
Rated current	630 A
Rated voltage	690 V AC
Breaking capacity	50 kA
Poles	3
Mounting	Fixed
Standards	IEC 60947-2

Related product manuals