ABB HT564257 User Manual

130 pages

To Next Page

To Next Page

Page #1 background image

Loading...

Page #1 background image

Operation Manual

ABB Turbocharging



ABB Turbo Systems Ltd

CH 5401 Baden

Type TPS48-F32 HT564257

n

Mmax

1033 t

Mmax

710

n

Bmax

981 t

Bmax

680

1/s °C

SOLD06 00180 12 50 50

Year 2016

made in Switzerland

Application according to

the Operation Manual

kg

HZTL2412 English

TPS48-F32

Original Operation Manual

Table of Contents

Questions and Answers:

P
Patricia RhodesAug 25, 2025
Why is the exhaust gas temperature too high in my ABB charger?
- A
  aaron27Aug 25, 2025
  If the exhaust gas temperature is too high in your ABB charger, it could be due to several reasons: * A malfunctioning injection system: Repair it or contact the manufacturer. * Air starvation (e.g., a filter silencer clogged with dirt): Clean the filter silencer. * High exhaust counterpressure: Clean or repair the boiler or exhaust silencer. * A contaminated cooler: Clean the cooler. * Low cooling water volume: Top up the water. * High cooling water entry temperature: Inspect or clean the cooling system. * Inadequate ventilation: Improve the ventilation.
J
jacob12Aug 30, 2025
What to do if rotating parts of ABB HT564257 are rubbing?
- J
  Jennifer DunnAug 30, 2025
  Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. If there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
C
Christy MillerAug 30, 2025
How to fix a sluggish start-up in ABB HT564257?
- H
  hfoxAug 30, 2025
  If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
C
Curtis TannerAug 30, 2025
What to do if rotating parts are rubbing in ABB HT564257 Industrial Equipment?
- K
  Kenneth FloresAug 31, 2025
  If you suspect rubbing of rotating parts within your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
D
Douglas LeeAug 31, 2025
What to do if ABB Industrial Equipment has vibration?
- A
  Allison AshleyAug 31, 2025
  If your ABB Industrial Equipment is vibrating, it could be due to rotor unbalance, in which case you should contact an ABB Turbocharging Service Station. Other potential causes include a damaged turbine or compressor, or a damaged bearing.
E
Elizabeth CastroAug 31, 2025
Why is my ABB HT564257 start-up sluggish?
- E
  Elaine BarnesAug 31, 2025
  A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
M
Mr. Jeffrey RichardSep 1, 2025
What to do if ABB HT564257 has a sluggish start-up?
- H
  Heather JacksonSep 1, 2025
  If your ABB Industrial Equipment experiences a sluggish start-up, it could be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
R
Robert HigginsSep 1, 2025
What to do if rotating parts in ABB Industrial Equipment are rubbing?
- N
  Natalie HernandezSep 1, 2025
  If you notice rubbing of rotating parts in your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
K
Kayla FreemanSep 2, 2025
How to fix sluggish start-up in ABB HT564257 Industrial Equipment?
- S
  Stacy RobertsonSep 2, 2025
  A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
M
Megan MartinezSep 2, 2025
What to do if the exhaust gas temperature is too high in ABB Industrial Equipment?
- J
  Jason WilliamsSep 2, 2025
  If the exhaust gas temperature is too high, several factors could be responsible. The injection system may be malfunctioning, requiring repair or manufacturer contact. Air starvation might be occurring due to a filter silencer clogged with dirt, which needs cleaning. High exhaust counterpressure could be the issue, necessitating cleaning or repair of the boiler or exhaust silencer. Other potential causes include a damaged or eroded turbine (in which case you should contact an ABB Turbocharging Service Station), a contaminated cooler (clean it), low cooling water volume (top up the water), high cooling water entry temperature (inspect/clean the cooling system), or inadequate ventilation (improve the ventilation).

ABB HT564257 Specifications

General

Brand	ABB
Model	HT564257
Category	Industrial Equipment
Language	English

Related product manuals

Preview: ABB HT564586

Preview: ABB HT564755