To Next PageTo Next PageWhy does my ABB HT567160 Industrial Equipment have vibrations?
Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
What to do if rotating parts in ABB Industrial Equipment are rubbing?
If you notice rubbing of rotating parts in your ABB Industrial Equipment, and there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
What to do if my ABB HT567160 has a sluggish start-up?
A sluggish start-up in your ABB Industrial Equipment can occur if the turbocharger is contaminated, in which case you should clean it. It can also happen if there is a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
How to handle rubbing of rotating parts in ABB Industrial Equipment?
If you notice rubbing of rotating parts in your ABB Industrial Equipment and are unsure about the extent of the rubbing, contact an ABB Turbocharging Service Station. Also, have a dimension check carried out by an ABB Turbocharging Service Station.
How to fix sluggish start-up of ABB HT567160?
A sluggish start-up of your ABB Industrial Equipment might be due to a contaminated turbocharger, a damaged bearing, a rubbing rotor, or a foreign object in the turbocharger. Try cleaning the turbocharger first. If the bearing is damaged, contact an ABB Turbocharging Service Station.
Why is there an increase in speed in my ABB Industrial Equipment?
An increase in speed in your ABB Industrial Equipment could be due to a heavily contaminated nozzle ring (with 4-stroke application). If this is the case, you should contact an ABB Turbocharging Service Station.
Why is my ABB Industrial Equipment making noises during run-down?
If you are experiencing noises during run-down of your ABB Industrial Equipment, it could be due to a contaminated turbocharger, which requires cleaning. Alternatively, it could be caused by a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.
Why is there a reduction in speed in my ABB HT567160?
If your ABB Industrial Equipment exhibits a reduction in speed, it could stem from several issues. Defects in connected cylinders during pulse charging may be the cause, in which case you should contact the engine builder. Alternatively, heavy contamination of the turbine could be the problem, requiring cleaning. Damaged rotor components or bearings can also lead to speed reduction, necessitating contacting an ABB Turbocharging Service Station. Finally, defects like leaks in the exhaust gas pipes or charge air ducts can contribute, and these should be repaired.
How to fix sluggish start-up in ABB HT567160 Industrial Equipment?
A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
Why is the exhaust gas temperature too high in my ABB HT567160 Industrial Equipment?
If the exhaust gas temperature is too high in your ABB Industrial Equipment, it could be due to several reasons. The injection system might be malfunctioning, requiring repair or attention from the manufacturer. Alternatively, there might be air starvation because the filter silencer is clogged with dirt, necessitating cleaning. High exhaust counterpressure could also be the culprit, which means you should clean or repair the boiler or exhaust silencer. Other potential causes include a dirty cooler (clean it), insufficient cooling water volume (top it up), high cooling water entry temperature (inspect/clean the cooling system), or inadequate ventilation (improve it).
General| Rated Current | 160 A |
|---|---|
| Poles | 3 |
| Mounting | Fixed |
| Type | HT567160 |
| Rated Voltage | 690 V AC |
| Standards | IEC |
