To Next PageTo Next PageHow to troubleshoot a sluggish start-up in ABB HT571244?
If your ABB Industrial Equipment has a sluggish start-up, it could be due to: * A contaminated turbocharger; clean it. * A damaged bearing; contact an ABB Turbocharging Service Station.
Why is there a reduction in speed in my ABB HT571244 Industrial Equipment?
If you notice a reduction in speed in your ABB Industrial Equipment, it could be caused by: * Heavy contamination of the turbine; clean it. * Damaged rotor components or bearing; contact an ABB Turbocharging Service Station.
Why is the charge air pressure too high in my ABB HT571244?
If the charge air pressure is too high in your ABB Industrial Equipment, it could be due to: * A malfunction in the injection system; repair it or contact the manufacturer. * The injection being misaligned; set it correctly.
What causes the charge air pressure to be too low in ABB Industrial Equipment?
If the charge air pressure is too low in your ABB Industrial Equipment, it might be due to: * A leaky air receiver; repair it. * A maladjusted injection system; correct it. * A faulty manometer display; replace the manometer. * A dirty filter silencer causing excessive pressure loss; clean it.
Why is the lubricating oil pressure too low in my ABB Industrial Equipment?
If the lubricating oil pressure is too low in your ABB Industrial Equipment, consider the following: * The oil filter might be heavily contaminated; clean it. * The oil pump in the lubricating system may be defective; check or replace it. * The manometer display could be wrong; replace the manometer. * The rotor axial clearance might be too large; contact an ABB Turbocharging Service Station.
Why is my ABB HT571244 vibrating?
Vibrations in your ABB Industrial Equipment can stem from several issues: an unbalanced rotor, a damaged turbine or compressor, or a damaged bearing.
Why is the exhaust gas temperature too high in my ABB HT571244?
If the exhaust gas temperature is too high in your ABB Industrial Equipment, it could be due to several reasons: * The injection system might be malfunctioning; in this case, repair it or contact the manufacturer. * There might be air starvation, possibly caused by a filter silencer clogged with dirt; clean it. * The cooler could be dirty; clean it. * The cooling water volume might be insufficient; top up the water. * The entry temperature of the cooling water could be too high; inspect or clean the cooling system. * There may be inadequate ventilation; improve the ventilation.
Why is my ABB HT571244 start-up sluggish?
A sluggish start-up of your ABB Industrial Equipment can be attributed to several factors. The turbocharger may be contaminated and needs cleaning. Alternatively, there could be a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other possible causes include a rubbing rotor or a foreign object present in the turbocharger.
How to deal with rubbing of rotating parts in ABB HT571244 Industrial Equipment?
If you notice rubbing of rotating parts in your ABB Industrial Equipment, and you have any doubt about the extent of the rubbing, then an ABB Turbocharging Service Station must be contacted. Also, have a dimension check carried out by an ABB Turbocharging Service Station.
What to do if ABB HT571244 Industrial Equipment has a sluggish start-up?
A sluggish start-up of your ABB Industrial Equipment may be due to a contaminated turbocharger, in which case you should clean it. It could also be caused by a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other causes may include a rubbing rotor or a foreign object in the turbocharger.
General| Brand | ABB |
|---|---|
| Model | HT571244 |
| Category | Industrial Equipment |
| Language | English |
