EasyManua.ls Logo

ABB HT574317 - User Manual

ABB HT574317
132 pages
Save Page as PDF
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
Operation Manual
ABB Turbocharging

ABB Turbo Systems Ltd
CH 5401 Baden
Type TPS48-F33 HT574317
n
Mmax
1006 t
Mmax
680
n
Bmax
956 t
Bmax
650
1/s °C
00180 12 50 50
Year 2017
made in Switzerland
Application according to
the Operation Manual
kg
HZTL2412 English
TPS48-F33
Original Operation Manual

Table of Contents

Questions and Answers

  • L
    Lynn GibsonAug 31, 2025
    Why is there a reduction in speed in my ABB Industrial Equipment?
    • J
      Jamie EscobarAug 31, 2025
      If your ABB Industrial Equipment exhibits a reduction in speed, it could stem from several issues. Defects in connected cylinders during pulse charging may be the cause, in which case you should contact the engine builder. Alternatively, heavy contamination of the turbine could be the problem, requiring cleaning. Damaged rotor components or bearings can also lead to speed reduction, necessitating contacting an ABB Turbocharging Service Station. Finally, defects like leaks in the exhaust gas pipes or charge air ducts can contribute, and these should be repaired.
  • B
    bramirezSep 9, 2025
    Why does my ABB HT574317 have vibrations?
    • P
      Paul WareSep 9, 2025
      Vibrations in your ABB Industrial Equipment may be due to rotor unbalance. In this case, you should contact an ABB Turbocharging Service Station.
  • E
    Eric MacdonaldAug 29, 2025
    How to fix sluggish start-up in ABB Industrial Equipment?
    • M
      Michael JohnsonAug 29, 2025
      A sluggish start-up of your ABB Industrial Equipment could be caused by a contaminated turbocharger, which you can resolve by cleaning it. It may also be due to a damaged bearing, in which case you should contact an ABB Turbocharging Service Station. Other potential causes are rubbing rotor or a foreign object in the turbocharger.
  • M
    mbrooksSep 23, 2025
    How to fix sluggish start-up of ABB Battery Charger?
    • J
      John MendezSep 23, 2025
      A sluggish start-up in your ABB Battery Charger can be caused by a contaminated turbocharger, in which case you should clean it. Alternatively, it might be due to a damaged bearing, which requires you to contact an ABB Turbocharging Service Station.
  • P
    Phyllis NelsonSep 12, 2025
    What to do if rotating parts of ABB HT574317 are rubbing?
    • J
      jeffreyjenkinsSep 12, 2025
      Rubbing of rotating parts in ABB Industrial Equipment can be normal behavior and not a malfunction. If there is any doubt about the extent of rubbing, then an ABB Turbocharging Service Station must be contacted.
  • T
    taylorjohnSep 14, 2025
    How to troubleshoot turbocharger surging in ABB Industrial Equipment?
    • K
      Katherine MunozSep 15, 2025
      To troubleshoot turbocharger surging in ABB Industrial Equipment, check the following: * If the guard in front of the turbocharger is contaminated or damaged, clean or replace it. * If the filter silencer or diffuser is contaminated, clean it. * If the cooler is contaminated, clean it.
  • R
    Ronald JohnsonSep 23, 2025
    What causes measured speeds to be too high in ABB Industrial Equipment?
    • K
      Kerry WatsonSep 23, 2025
      If measured speeds are too high in ABB Industrial Equipment, it could be due to a contaminated sensor tip. Dismantle the sensor, clean its tip, and refit the sensor using the specified tightening torque.
  • E
    Erika PorterAug 27, 2025
    How to fix a sluggish start-up in ABB HT574317 Industrial Equipment?
    • D
      Denise HarrisAug 27, 2025
      If your ABB Industrial Equipment has a sluggish start-up, it might be due to a contaminated turbocharger, in which case you should clean it. Alternatively, a damaged bearing could be the cause, requiring you to contact an ABB Turbocharging Service Station.
  • V
    Veronica LopezAug 26, 2025
    How to handle rubbing of rotating parts in ABB HT574317?
    • M
      Martin WeaverAug 26, 2025
      If you notice rubbing of rotating parts in your ABB Industrial Equipment and are unsure about the extent of the rubbing, contact an ABB Turbocharging Service Station. Also, have a dimension check carried out by an ABB Turbocharging Service Station.
  • C
    christopher72Aug 25, 2025
    What to do if my ABB Industrial Equipment has a sluggish start-up?
    • J
      justinfordAug 26, 2025
      A sluggish start-up in your ABB Industrial Equipment can occur if the turbocharger is contaminated, in which case you should clean it. It can also happen if there is a damaged bearing, in which case you should contact an ABB Turbocharging Service Station.

ABB HT574317 Specifications

General IconGeneral
Rated Current16 A
Breaking Capacity6 kA
MountingDIN rail
Protection ClassIP20
TypeCircuit Breaker
Rated Voltage400V AC

Related product manuals