PLEASE
NOTE!
Our experience has shown that, if the information and recommendations contained
in
these "Instructions
for
Installation and Operation" are observed, the best possible re-
liability
of
our products is assured.
It is scarcely possible
for
the operating instructions of technical equipment
to
cover
every eventuality which can occur in practice.
We
would therefore request you
to
notify
us
or
our agent
in
the case of all unusual behaviour, which does not appear
to
be
covered
by
these operating instructions.
It is pointed out that all local regulations must be observed when connecting and
commissioning this equipment in addition to these operating instructions.
Any
work
that has
to
be carried out inside the equipment, such as changing soldered
links
or
fitting
or
removing resistors, may only be performed
by
correspondingly
qualified personnel.
We cannot accept any responsibility
for
damage incurred as a result
of
mishandling the
equipment regardless
of
whether particular reference is made in these operating
instructions
or
not.
To Next Page
Loading...
