Operation ENG 44
19 Operation
Centralised and decentralised pushbutton mode
(see Fig. 4)
To switch on
● Briefly press the pushbutton extension.
The brightness value last set (memory value) will be
automatically set.
To switch on with dark-start function
● Hold pushbutton extension down.
The dimmer starts with the basic brightness and dims in
the direction of "brighter" until the pushbutton is released.
To dim
● Hold pushbutton extension down.
The dimmer changes the brightness of the connected
lighting unit. The dimming direction reverses each time the
pushbutton is released. At maximum brightness, the
dimmer stops; at minimum brightness, the dimming
direction changes.
To Next Page
Loading...
