16
Slide Upper Leg (7) in Lower Leg assembly & assemble using
M12 bolts, spring, washers, plain washers & Hex Nuts.
Fix Support-Angles(9) on Upper Leg Assembly(1) & (7) as
Fix Cross-Angles (11)
Fix CT Frame(10) on the Support Angles(9)
For the sake of flexibility, do not fully tighten the fasteners.
1
9
1
9
10
7
1
1
1
1
Shown
Circuit-breaker Structure Assembly with CT structure
4.2.1.4 Dismantling of Cases
4.2.1.4.1 Unpacking of Cabinet
Cabinet Assembly on palate
Remove top & all side covers of casing containing Cabinet
Do not remove the bottom pallet.
Assembly.
Remove Vacuum sealing
PART B Installation, Operation & Maintenance
To Next Page
Loading...
