Need help?Do you have a question about the ABB XT7M and is the answer not in the manual?
General| Product Name | ABB XT7M |
|---|---|
| Rated Voltage (Ue) | 690V AC |
| Number of Poles | 3, 4 |
| Trip Unit Type | Electronic |
| Standards | IEC 60947-2 |
| Mechanical durability | 10, 000 operations |
| Protection degree | IP20 |
| Category | Molded Case Circuit Breaker |
Detailed steps for configuring the Long Time Protection (L Protection) parameters.
Procedure for setting up the Short Time Protection (S Protection) parameters.
Guide to configuring the Instantaneous Protection (I Protection) settings.
Steps to configure Ground Fault Protection (G Protection) parameters.
Final steps to save and confirm all protection setting adjustments.
Detailed steps for configuring the Long Time Protection (L Protection) parameters for XT2/XT4.
Procedure for setting up the Short Time Protection (S Protection) parameters for XT2/XT4.
Guide to configuring the Instantaneous Protection (I Protection) settings for XT2/XT4.
Steps to configure Ground Fault Protection (G Protection) parameters for XT2/XT4.
Final steps to save and confirm all protection setting adjustments for XT2/XT4.
Configuration of the 2I Protection (Second Instantaneous Pickup or I31) settings.
Steps to activate the Arc Flash Mitigation / RELT / 21 Advanced Protection function.
To Next Page
