Need help?Do you have a question about the ABB XT7 and is the answer not in the manual?
General| Category | Molded Case Circuit Breaker (MCCB) |
|---|---|
| Rated Voltage (Ue) | 690V AC |
| Poles | 3P, 4P |
| Standards | IEC 60947-2 |
| Product Name | XT7 |
| Trip Unit Type | Electronic |
| Mounting | Fixed, Plug-in |
Table for filling in protection settings values from coordination studies.
Illustrates protection settings in EDSA for analysis.
Configuration steps for the Long Time Protection function.
Configuration steps for the Short Time Protection function.
Configuration steps for the Instantaneous Protection function.
Configuration steps for the Ground Fault Protection function.
Final steps to save and apply configured protection settings.
Configuration of Long Time Protection for XT2/XT4 models.
Configuration of Short Time Protection for XT2/XT4 models.
Configuration of Instantaneous Protection for XT2/XT4 models.
Configuration of Ground Fault Protection for XT2/XT4 models.
Procedure for setting up Arc flash, RELT, and 21 Protection.
Steps to activate the configured Arc Flash / RELT / 21 protection.
Guide to change device language to English.
Procedure for setting the date and time on specific models.
Procedure for setting the date and time on XT2/XT4 models.
To Next Page
