Name: Abbott i-STAT
Brand: Abbott
Rating: 5 (1 reviews)

To Next Page

To Previous Page

C. Transmitting Results Using the Downloader or Downloader/Recharger (DR)

. Place handheld in Downloader or DR.

2. A Communication in Progress message will appear on the handheld display.

3. Do not move the handheld until the Communication in Progress messages disappears. Once the message

disappears, the transmission is successful.

Note 3.1: When wireless is enabled and conﬁgured on an i-STAT 1 Wireless Analyzer, wireless communication

will be attempted ﬁrst. If wireless communication fails, wired communication will then be attempted.

Note 3.2: If there are unsent results remaining in the handheld at the completion

of a transmission attempt, a

Communication Ended message will

appear on the handheld indicating how many unsent results are left.

Communication

Ended

Unsent: 4

1 – Continue

Art: 726025-01A 9Rev. Date 24-NOV-14

Other manuals for Abbott i-STAT

Questions and Answers:

Need help?

Do you have a question about the Abbott i-STAT and is the answer not in the manual?

General

Type	Handheld blood analyzer
Power Source	Rechargeable lithium-ion battery
Display	Touchscreen LCD
Connectivity	Wireless
Sample Type	Whole blood
Test Cartridge Types	CG4+, CHEM8+, EG7+
Operating Temperature	15° to 30°C (59° to 86°F)
Battery Life	Approximately 8 hours
Humidity Range	10% to 90% non-condensing
Sample Volume	95 µL
Time to Results	2 minutes
Regulatory Approvals	FDA cleared, CE marked
Measurement Parameters	Blood gases, electrolytes, chemistries, coagulation, hematology