What to do if the pick-up is clogged on Abbriata M100?
If the pick-up of your Abbriata Lawn and Garden Equipment is clogged, first try stopping and reversing with the P.T.O. engaged while lifting and lowering the pick-up. If there are large blockages, disengage the P.T.O., turn off the tractor, remove the ignition key, and then manually remove the clogged crop.
What to do if the bale is not ejected from the chamber of my Abbriata M100 Lawn and Garden Equipment?
If the bale is not ejected from the chamber of your Abbriata Lawn and Garden Equipment, try the following: reduce the baling pressure; keep the machine on the central axis of the crop line; assemble the “Iron wedges” on the rear door, which are supplied as standard equipment; and make sure the machine is slightly inclined upwards at the front.
What to do if the chamber does not close perfectly on Abbriata M100?
If the chamber of your Abbriata Lawn and Garden Equipment does not close perfectly, adjust the position of the hook using bolt 9 Fig. 8/A (see pag.16). Also, check for any crop between the base of the rear door and the frame of the machine, and remove it if necessary.
How to fix twine slipping on one side of the bale with Abbriata Lawn and Garden Equipment?
If the twine slips on one side of the bale on your Abbriata Lawn and Garden Equipment, adjust the twine limiter located under the binder unit on both sides (see parts 6 of “Scheme of automatic binder” page 8).
General| Brand | Abbriata |
|---|---|
| Model | M100 Series |
| Category | Lawn and Garden Equipment |
| Language | English |
To Next Page