Need help?Do you have a question about the Abbriata Miniroto M50 and is the answer not in the manual?
General| Brand | Abbriata |
|---|---|
| Model | Miniroto M50 |
| Category | Farm Equipment |
| Language | English |
Safely unload the baler from the truck using forks and placing it on level ground.
Step-by-step guide to detach the baler from its shipping pallet.
Connect the baler's drawbar to the tractor's pintle hitch after removing pallet supports.
Measure the height of the tractor's drawbar to ensure proper baler hitch alignment.
Adjust the baler's pintle hitch height to align correctly with the tractor's drawbar.
Install and orient the gathering wheels correctly for optimal crop feeding.
Adjust the pickup tines and gathering wheels for transport or bale formation.
Understand the gauge wheel and verify pickup tine clearance, adjusting drawbar angle as needed.
Activate and test the siren that signals bale completion.
Set the desired bale tightness by adjusting the density control arm.
Understand shear pin function, replacement, and locate spare parts.
Install bale ejector plates if bales have difficulty ejecting from the baler.
Identify the two rear and one front lift points for lifting the baler.
Properly oil the baler's drive chains before and after each use.
Adjust the hydraulic valve to control the rear door's closing speed.
To Next Page