Abbyson Belmont Fire Table

Questions and Answers

R
Rachel AguilarAug 11, 2025
Why won't the burner light on my Abbyson Belmont Fire Table?
- M
  Mary CunninghamAug 11, 2025
  If the burner of your Abbyson Outdoor Fireplace won't light, there might be several reasons: 1. The propane cylinder could be frosted over. In this case, wait for it to warm up and become unfrosted. 2. There might be a blockage. Double-check for and clear any obstructions. 3. The control knob might not be in the ON position. Ensure that it is turned to ON. 4. Too much lava rock covering the burner bowl or small pieces may be blocking the burner holes. Remove some of the lava rock to ensure proper airflow.
S
Samantha HarveyAug 21, 2025
What to do if there is carbon build-up and/or thick black smoke on Abbyson Belmont Fire Table Outdoor Fireplace?
- E
  Emily MyersAug 21, 2025
  If you notice carbon build-up or thick black smoke coming from your Abbyson Outdoor Fireplace, it's likely due to: * Dirt or film on the reflector and burner screen. Try cleaning these components. * A blocked burner. Clear any blockage and thoroughly clean the burner, both inside and out.
M
Melinda WeaverAug 30, 2025
Why is the burner flame too low on my Abbyson Belmont Fire Table Outdoor Fireplace?
- N
  Nicholas SpencerAug 30, 2025
  A low burner flame on your Abbyson Outdoor Fireplace could be due to a few things: * Low gas pressure. Turn off the cylinder valve and replace the cylinder. * Outdoor temperature below 40°F and a tank less than ¼ full. Use a full propane cylinder. * A blockage in the burner or openings. Inspect and clear any obstructions.

Abbyson Belmont Fire Table Specifications

General

Fuel Type	Propane
BTU	50, 000
Ignition Type	Electronic
Shape	Rectangular
Tank Size	20 lbs
Includes	Lava Rocks

Abbyson Belmont Fire Table - User Manual

Table of Contents

Questions and Answers

Abbyson Belmont Fire Table Specifications