ABC Design Moonlight - Setting Up the Travel Cot; Unpack and Prepare Cot; Assemble and Secure Frame; Finalize Cot Assembly

1.
1.1.
1. Set up the bed
Set up the bed Set up the bed
Set up the bed
Take the cot out of the bag.
Open the velcro with its velcros and lie the mattress on its side.
Spread the four tubes apart.
First pull up the cross links on the short side and then on the
long side of the cot until they snap in.
Pay attention that the cross links are snapped in and that it is
not possible to push them down
Push the board
Put the mattress into the travel cot.
Page 3