Need help?Do you have a question about the Abcon POSTSHIP Series and is the answer not in the manual?
Instructions for installing and replacing batteries, covering correct usage, storage, and disposal.
Explains how to use the hold function to freeze the weight reading on the display for 120 seconds.
Details how to select and convert weighing units before or after placing an item on the scale.
Covers setting up auto shut off, auto backlight, and auto hold features for the scale.
Step-by-step guide on how to operate the scale for accurate weight measurements, including zeroing and tare.
Explains the scale's calibration system which allows use of any known weight object, not special calibration weights.
Describes the unique calibration method that uses everyday objects with known weights for easy and quick calibration.
Provides detailed instructions on how to calibrate the scale using the Any Weight Calibration® System, including preparation steps.
Addresses scale inaccuracy and error codes like Err-C, recommending recalibration as per page 9.
Explains unstable weight readings are often caused by faulty AC adapters or battery issues.
Identifies faulty AC adapters as the usual cause for a constantly flashing backlight.
Indicates physical damage from dropping or shock, suggesting recalibration or contacting supplier.
Signifies the scale has exceeded its maximum capacity, including tare and zero functions.
Indicates an unstable surface or internal damage, requiring repositioning or supplier contact.
Covers blank backlight with beeps, possibly due to faulty AC adapter or IC chip failure.
Suggests memory IC chip issues or faulty AC adapter if the scale skips desired units during conversion.
To Next Page
General