Visit: www.abisupport.com
40
Options (cont'd)
ITEM PART # DESCRIPTION
1 10-10085 1/4 VIBRAFLEX PIN
2 10-10094 LBL:VIBRA FLEX 1" X 6"
3 10-20044 HCS 3/8-16x7/8 Z5
4 10-20128 5/16 SAE WASHER ZNC
5 10-20133 3/8" SPLIT LOCKWASHER ZNC
6 10-20195 FLT WSHR:3/8 SAE:CL ZINC
7 10-20221 BENT PIN:1/2"X3.5":ZINC
ITEM PART # DESCRIPTION
8 10-20232 LYNCH PIN:1/4"X1.25":ZINC
9 10-20335 NYLOCK NUT: THIN :5/16-18:ZINC GR 5
10 10-30993 CHANNEL: PIN HOLDER: 3800 VIBRAFLEX
11 10-40246 WLDMT: SHANK VIBRAFLEX
12 10-40247 WLDMT: 3800 VIBRAFLEX
13 10-90333 PKG: EXTRA PINS: SHIPS WITH VIBRAFLEX
The model 3800 VibraFlex groomer is for daily grooming on recreational fields. The VibraFlex attachment is a complete re-
imagining of infield grooming. Four evenly staggered rows of 1/4″ or 3/8″ U-shaped pins creating 3/4″ spacing to transfer
vibration & flex from front to back, dancing along the surface, shattering surface-tension to properly groom any infield. The
1/4" or 3/8" pins are easy to replace or exchange and are mounted at an angle to create the best suit surface conditions. ABI
recommends the vibraflex should be pulled in a circular motion while only penetrating the surface ¼- ½ inches for daily
grooming, and deeper based o the end users’ goals.
10-90165 - VIBRAFLEX 5' INFIELD DRAG (MODEL 3800) (cont'd)
To Next Page
Loading...
