Call Toll Free: 877-788-7253Email: support@abiattachments.com
43
The model 5800 VibraFlex™ groomer functions just like the standard model 3800 but is designed for higher clay content (higher
end) infield surfaces. This drag includes both an 1/8” and 1/4” thick set of u-shaped pins that are mounted at an angle to create
four staggered rows with a 1/2” spacing. The 1/8” pins are specifically designed for the world’s most pristine playing surfaces.
This VibraFlex™ Technology is simply the pinnacle choice for frequent infield surface maintenance. ABI recommends the vibraflex
should be pulled in a circular motion while only penetrating the surface ¼- ½ inches for daily grooming, and deeper based o the
end users’ goals.
ITEM PART # DESCRIPTION
1 10-10085 1/4 VIBRAFLEX PIN
2 10-10094 LBL:VIBRA FLEX 1" X 6"
3 10-20044 HCS 3/8-16x7/8 Z5
4 10-20128 5/16 SAE WASHER ZNC
5 10-20133 3/8" SPLIT LOCKWASHER ZNC
6 10-20195 FLT WSHR:3/8 SAE:CL ZINC
7 10-20221 BENT PIN:1/2"X3.5":ZINC
ITEM PART # DESCRIPTION
8 10-20232 LYNCH PIN:1/4"X1.25":ZINC
9 10-20335 NYLOCK NUT: THIN :5/16-18:ZINC GR 5
10 10-30994 CHANNEL: PIN HOLDER: 5800 VIBRAFLEX
11 10-40246 WLDMT: SHANK VIBRAFLEX
12 10-40248 WLDMT: 5800 VIBRAFLEX
13 10-90445 KIT: 60 SILVER AND 2 GOLD PINS: BOXED
To Next Page
Loading...
