Abicor Binzel FES-200 W3 User Manual (English)

Other manuals for Abicor Binzel FES-200 W3

Questions and Answers:

Donna CallahanAug 3, 2025

What to do if the Abicor Binzel FES-200 W3 Scrubber suction is too weak?

W
William JacksonAug 3, 2025
If the Abicor Binzel Scrubber's suction is weak and the manometer indicator is near the red point, it could be due to several reasons: a clogged suction hose or a soiled filter cartridge. Here's what you can do: * Check the suction hose for straightness and replace it if necessary. * Inspect the suction hose for any damage or clogging. * Hold the hose vertically and use a rubber hammer to clean it. * Dedust the filter.

hmartinAug 13, 2025

Why is my Abicor Binzel Scrubber fume extraction system not ready for operation?

J
Jeremy GoodwinAug 13, 2025
The Abicor Binzel Scrubber fume extraction system might not be ready for operation due to a defective control system, component, turbine, or carbon brushes. Another cause might be that the system cannot be switched on. Here’s what you should do: * Check the control system or components and replace if necessary. * Check the turbine and replace if necessary. * Check the carbon brushes and replace if necessary. * Switch off the power to the system, check the voltage circuit breaker, and replace if necessary.

Brand	Abicor Binzel
Model	FES-200 W3
Category	Scrubber
Language	English

Brand

Abicor Binzel

Model

FES-200 W3

Identification

EU Declaration of Conformity

Official statement confirming product compliance with EU directives and standards.

Safety

Designated use

Specifies the intended purpose and manner of using the fume extraction system.

Obligations of the operator

Outlines the responsibilities of the user regarding safe operation and maintenance.

Specific safety instructions

Details critical safety precautions for operation, including hazards and notices.

Safety instructions for the mains connection

Provides essential guidance for safely connecting the device to the electrical mains.

Personal protective equipment (PPE)

Recommends specific protective gear for users to prevent injury during operation.

Classification of the warnings

Explains the meaning and severity levels of warning symbols used in the manual.

Warning and notice signs

Identifies warning and notice symbols present on the product and their meanings.

Emergency information

Instructs on immediate actions to take in case of an emergency situation.

Product description

Technical data

Lists key technical specifications and performance parameters of the fume extraction system.

Abbreviations

Defines common acronyms and abbreviations used throughout the operating instructions.

Nameplate

Describes the information found on the device's nameplate for identification.

Signs and symbols used

Explains the various signs and symbols employed within the operating manual.

Scope of delivery

Transport

Details the process and checks required for receiving and inspecting the delivered product.

Storage

Provides guidelines for storing the fume extraction system under suitable ambient conditions.

Functional description

Emptying the dust collecting drawer

Step-by-step instructions for safely removing and emptying the dust collection drawer.

Filter dedusting (dedusting by rotation)

Explains the procedure for cleaning the filter using compressed air to maintain performance.

Replace the filter cartridge

Guides on how to replace the filter cartridge when it becomes clogged or ineffective.

Putting into operation

Transport and installation

Instructions for correctly placing and installing the fume extraction system in the work area.

Start-stop pliers

Details the use and function of start-stop pliers for automatic system activation.

Establishing the electrical connection

Step-by-step guide for safely connecting the fume extraction system to the power supply.

Operation

Control elements

Identifies and explains the function of the main control elements on the device.

After long periods of non-use

Provides instructions for re-activating the system after it has been stored for an extended time.

Maintenance and cleaning

Inspection intervals

Specifies recommended intervals and tasks for routine inspections of the equipment.

Disposal

Materials

Information on the materials used in the product and their recyclability.

Consumables

Guidance on the disposal of consumables like dust bags and cleaning agents.

Packaging

Information regarding the disposal and recycling of the product's packaging materials.

Appendix

Spare parts

Lists available spare parts with their corresponding article numbers for ordering.

Accessories

Lists optional accessories for the fume extraction system with article numbers.

Circuit diagram

Presents the electrical circuit diagram for the 230V/50Hz version of the system.

Abicor Binzel FES-200 W3 User Manual

Table of Contents