Abilica CrossTech E-14 - Page 6

6
35 Belt 1651 pj6 1
36L Left chain cover 1
36R Right chain cover 1
37 Flywheel D265*153*50 1
38 Flat washer D24*D16*1.5T 1
39 Side cover D36*16 2
40 Bolt M8*1.25*20L 4
41 Cross screw ST4.2x1.4x20L 6
42 Round disc D456*29 2
43 Bearing #6004ZZ 2
44 Bolt M6*1.0*15L 4
45 Nylon nut M8*1.25*8T 1
46 Flat washer D28*D8.5*3T 1
47 Waved washer D21xD16.2x0.3T 3
48 Spring washer D10.5*D6.1*1.3T 4
49 Upper protective cover 1
50 C ring S-16(1T) 3
51 Spring D1.0*55L 1
52L Left swing support tube 1
52R Right swing support tube 1
53 Foam D30x3Tx680L 2
54 Foam D23x5Tx530L 2
55 Mushroom end cap D1 1/4"*45L 2
56 Spring D3.5*D20*70L 1
57 Flat washer D25*D8.5*2T 4
58 Round cross screw ST4x1.41x20L 8
59 Bolt M8*1.25*50L 1
60 Flat washer D21*D8.5*1.5T 4
61 Crank axle D20*116L 1
62 Round magnet M02 1
63 Cross screw ST3.5*1.27*15L 8
64 Computer SE2630-67 1
65 Hand pulse WP1007-12B 2
Pulse cable 600L 2
66 Flat washer D50*D10*2.0T 1
67 Front computer bracket 380*150*50 1
68 Rear computer bracket 340*150*50 1
69 Front pedal axle D15.85x63.2L 2
70 Idle fixing plate 1
71 Waved washer D27*D21*0.3T 1
72L 1