Abilica XC-Classic 2000 - Page 10

10
STEP 2
Attach the Left and Right Upper Arms (2/3) to Main Body (1) to using: 4 PCs of M8x12mm
Socket Head Cap Screw (86) and M8 Flat Washer (71). Then tighten all bolts.
STEP 3
Attach the Arm Connection Bracket (5) to Left and Right Upper Arms (2/3) using: 2 PC of
M8x15mm Socket Head Cap Screw (87) and 2 PC of M8 Flat Washer (71). Then tighten all
bolts.
NOTE: Fully tighten bolts at end of above steps
#87 M8X15mm 2PCS
#71 M8 6PCS
#86 M8X12mm 4PCS
#89 Allen Wrench 6mm