Abilica XC-Classic 2000 - Page 11

11
STEP 4
Attach the Top Bracket (4) to Left and Right Upper Arms (2/3) using: 4 PCs of M8x12mm
Socket Head Cap Screw (86) and M8 Flat Washer (71). Then tighten all bolts.
NOTE: Fully tighten bolts at end of above step.
NOTE: Before assembling check if Drive Cord (52) is untangled.
#86 M8X12mm 4PCS
#71 M8 4PCS
#89 Allen Wrench 6mm