P. 7
MS01010031
A
Before operation, please remove Lock Nut (A) and press the button of Circuit Breaker
(B) to activate the system.
MAIN KEY SWITCH (C)
Turn the key to the right to turn the scooter
on.
Turn the key to the left to turn the scooter
and LED light on.
Turn the key to the centre position to turn
the scooter o.
THROTTLE (D AND D1)
1. To move forward, pull the right side of
Throttle (D)
2. To move backwards, pull the left side of
Throttle (D1 ).
3. Release the throttle to engage automatic
brake.
(Throttle (D) and (D1) can be reversed by local
dealers if required.)
SLEEP MODE
The scooter will go into “Sleep Mode” if no throttle activity is detected for 10 minutes.
When the scooter is in “Sleep Mode”, all control panel lights will turn o and the scooter will
be inoperable.
Cycle the power to “Wake Up” the scooter.
CAUTION
• Always ensure that the scooter is powered o before getting on or o the
scooter and before removing any items from the scooter.
• Turning the scooter OFF whilst driving will bring the scooter to an abrupt stop.
• Automatic braking is applied when the throttle is released. The scooter will
continue to travel a short buer distance, so keep a safe distance when
stopping to avoid danger.
D1 D
C
To Next Page
Loading...