3-2 Chapter 3
F6:
You may create a profile to save the new BIOS settings in it. Press <F6> button in the main menu, a
dialog box with five numbers (1~5) will appear on the screen. Select one number, and press <Enter>.
Then, you will get a confirmation dialog box with a message similar to:
Save Profile To BIOS (Y/N)?
After pressing “Y”, the following message will appear to assist you in creating a name for the profile.
Enter Profile Name:
Type the profile name, and press <Enter>. The new BIOS settings now are saved to the selected profile.
NOTE: You may save up to five profiles to BIOS.
F7:
Press <F7> button in the main menu, a dialog box with five numbers (1~5) will appear on the screen.
Select the profile you want, and press <Enter>. Then, you will get a confirmation dialog box with a
message similar to:
Load Profile From BIOS (Y/N)?
Press “Y” to load the BIOS settings in this profile.
AV8
To Next Page
Loading...