Abit USB-20V - User Manual

USB-20V
Quick
Installation
Guide
Thank you for purchasing ABIT USB-20V USB2.0 High-Speed PCI Host Card. The purpose
of this guide is give you a quick introduction to installing this card properly.
USB-20V Specifications
Features:
 Compliant with Universal Serial Bus (USB) Specification Revision 2.0 and 1.1
 Compliant with PCI specification revision 2.2
 High-Speed 480 Mb/sec data transfer speed
 Provides 4 external downstream Type-A USB ports, supports all USB speeds
 Supports Plug & Play specification
 Links up to 127 Devices
 Installation CD with USB 2.0 drivers for Windows
®
98SE, Windows
®
Me,
Windows
®
2000, and Windows
®
XP
Hardware Specification:
 USB Host Controller
VIA VT6202 USB 2.0 Host Controller
 Bus-System
32-bit PCI 2.2 standard
 I/O Interface
4 external Type-A USB ports
Operating Systems Supported:
• Windows
®
98SE
• Windows
®
ME
• Windows
®
2000
• Windows
®
XP
USB-20V PCI Card Layout Diagram
4×External Ports
PCI Interface
4200-0269-02 Ver. 1.01

Summary

USB-20 V Hardware and System Requirements

Hardware Specification

Details the USB controller, bus system, I/O interface, and external ports.

Supported Operating Systems

Lists the operating systems compatible with the USB-20V card.

USB-20 V Card Features and Diagram

USB-20 V Specifications

Outlines key features including USB revision compliance and data transfer speed.

USB-20 V PCI Card Layout

Provides a visual diagram of the USB-20V PCI card and its interface.

Installing the USB-20 V PCI Host Card

Connecting USB Devices

Abit USB-20V Specifications

General

Interface	PCI
Ports	4
Data Transfer Rate	480 Mbps
USB Version	USB 2.0
Compatibility	Windows 98/ME/2000/XP
External Ports	4x USB 2.0